Steel sheet pile is a type of steel with a lock. Its cross-sections include straight plate, groove and Z-shaped, etc., and are available in various sizes and interlocking forms. Common ones include Larson type, Lackawanna type, etc. Its advantages are: high strength, easy to drive into hard soil; it can be constructed in deep water, and if necessary, diagonal supports can be added to form a cage. It has good waterproof performance; it can form cofferdams of various shapes as needed and can be reused many times. Therefore, it has a wide range of uses.

Cold-formed steel sheet pile

The steel strip is continuously cold-bent and deformed to form plates for building foundations with a Z-shaped, U-shaped or other cross-section that can be connected to each other through locks.

Steel sheet piles produced by the roll-forming cold-forming method are one of the main products used in cold-formed steel in civil engineering. The steel sheet piles are driven (pressed) into the foundation with a pile driver and connected to each other to form a steel sheet pile wall, which is used to retain the Soil and water retaining. Commonly used cross-section types include: U-shaped, Z-shaped and straight web type. Steel sheet piles are suitable for supporting soft foundations and deep foundation pits with high groundwater levels. They are easy to construct and have the advantage of good water-stopping performance and can be reused. Delivery status of steel sheet piles. Cold-formed steel sheet piles are delivered in lengths of 6m, 9m, 12m, and 15m. They can also be processed to length according to user requirements, with a maximum length of 24m. (If the user has special length requirements, they can be mentioned when ordering) Cold-formed steel sheet piles are delivered by actual weight or by theoretical weight. Application of Steel Sheet Piles Cold-formed steel sheet pile products have the characteristics of convenient construction, fast progress, no need for large construction equipment, and are conducive to seismic design in civil engineering applications. The cross-sectional shape of cold-formed steel sheet piles can be changed according to the specific conditions of the project. and length, making the structural design more economical and reasonable. In addition, through the optimized design of the cross-section of the cold-formed steel sheet pile product, the quality coefficient of the product has been significantly improved, reducing the weight per meter of pile wall width and reducing project costs.

Hot rolled steel sheet pile

Hot-rolled steel sheet piles, as the name suggests, are steel sheet piles produced by welding and hot rolling. Due to advanced technology, its lock bite has strict water-proofing properties.

U-shaped steel sheet pile basic introduction

1. The WR series steel sheet pile has a reasonable cross-sectional structure design and advanced forming technology, which continuously increases the ratio of the cross-sectional modulus to the weight of the steel sheet pile products, enabling it to obtain good economic benefits in application and broadening the scope of cold-formed steel sheet piles. application fields.

2. WRU type steel sheet piles are available in various specifications and models.

3. Designed and produced according to European standards, the symmetrical structural form is conducive to reuse, and is equivalent to hot rolling in terms of reuse, and has a certain angle range to facilitate correction of construction deviations;

4. The use of high-strength steel and advanced production equipment ensure the performance of cold-formed steel sheet piles;

5. The length can be specially customized according to customer requirements, which brings great convenience to construction and also reduces costs.

6. Due to the convenience of production, when used with combined piles, they can be pre-ordered before leaving the factory.

7. The production design and production cycle are short, and the performance of steel sheet piles can be determined according to customer requirements.

Z-shaped steel sheet pile

1. Flexible design, with relatively high section modulus and mass ratio;

2. Higher moment of inertia, thereby increasing the stiffness of the sheet pile wall and reducing displacement and deformation;

3. Large width, effectively saving time on hoisting and piling;

4. The increased cross-section width reduces the number of shrinkage of the sheet pile wall and directly improves its water-stopping performance;

5. The parts with severe corrosion are thickened to make the corrosion resistance even better.

L-shaped steel sheet pile

The L-type is mainly used for the support of embankments, dam walls, trenching and ditching.

The cross-section is light, the pile wall takes up little space, and the locks are in the same direction, making construction easy. Suitable for municipal engineering excavation construction.

Straight steel sheet pile

Linear steel sheet piles are another form of steel sheet piles. Due to their low height and close to a straight line, they are more suitable for digging some ditches, especially when the space between two buildings is not large and must be excavated.

Excellent packaging: waterproof paper and plastic film + iron cover + at least three strapping straps + strapping straps fixed on iron or wood pallets can effectively protect products from corrosion and various climate changes during transportation. Generally speaking, we ship from Shanghai, Tianjin, Qingdao and Ningbo ports. We have worked with many experienced shipping companies for a long time to find the most suitable mode of transportation for you.